BoredAviator
← QRH 2

ZONE TEMP

Air Systems
QRH 2.26
Condition
Une ou plusieurs des situations suivantes se produisent :

• Un overheat de zone duct
• Le flight deck temperature control est en panne.
Temperature selector (affected cabin) → Select a cooler temperature
This prevents the trim air modulating valve from returning to an overheat condition.
TRIP RESET switch → Push
The ZONE TEMP light extinguishes if the duct temperature has cooled below limits.
Monitor duct temperature. If the duct temperature increases rapidly, set the TRIM AIR switch to OFF.

Choisis une option

Affected cabin temperature is excessively high→ Cabin Temperature Hot 2.11 Affected cabin temperature is normal✓ Fin de checklist
QRH officiel AILO-0902 (PDF)

Aide-mémoire formation. Le QRH papier/PDF Air Inuit fait toujours foi.