4. Ice Crystal Icing — indication TAT typique ?Ice Crystal Icing — typical TAT indication?
TAT reste près de 0 °C. Blank = panne capteur. OAT = panne chauffage hors givrage.TAT stays near 0 °C. Blank = sensor fail. OAT = heater fail in non-icing.
5. Les ports Alternate Static sont…Alternate Static ports are…
Alternate Static ports (not heated) — vers standby ASI/ALT ou ISFD.Alternate Static ports (not heated) — to standby ASI/ALT or ISFD.
TEMP PROBE = chauffage seulement — pas panne capteur.TEMP PROBE = heater only — not sensor failure.
7. Window Heat — puissance pleine après…Window Heat — full power after…
Rampe 3 min (choc thermique). Chauffer ≥ 10 min avant TO pour résistance impact.3-min ramp (thermal shock). Heat ≥ 10 min before TO for impact resistance.
8. PWR TEST Window Heat au sol…Window Heat PWR TEST on ground…
Tenir brièvement seulement — risque délaminage même avec OVERHEAT protection.Hold only momentarily — delamination risk even with OVERHEAT protection.
9. WTAI avec GRD TEST — ON au sol…WTAI with GRD TEST — ON on ground…
Air/Gnd inhibe — ON au sol = désaccord bright. GRD TEST spring override.Air/Gnd inhibits — ON on ground = bright disagree. GRD TEST spring override.
10. Essuie-glaces MEL 30-13 — contrainte principale ?Wipers MEL 30-13 — main constraint?
Inop OK si pas de précipitations dans 5 NM. CAT II-III : les deux requis si précip. anticipées.Inop OK if no precip within 5 NM. CAT II-III: both required if precip anticipated.